RIDGID R32104 Upper Blade Guard Assembly Replacement

Maneuver the RIDGID saw, in order to easily remove the upper blade guard assembly.

Using the T20 Torx Screwdriver, remove the four 4/10 cm screws that attach to the gear box.

Using the T50 Torx Screwdriver, remove the one 5/10 screw that attach to the gear box.

Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach to the handle of the device.

Maneuver the saw to get to the base plate.

Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach the upper blade guard’s base plate to the main housing assembly.