Introduction

This guide shows how to remove the side panel from the camera, how to remove the back panel, and how to replace the LCD screen.

  1. XyRHeHJxnwPRleEy
    • Slide the battery eject button open to release the battery door.

  2. Ea3Ef2khOWbPZiJD
    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

  3. GCCxAR3arAcRJbYL
    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

  4. BTKFTPjpSFd2M4dp
    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

  5. oeZeg2UHEyhVpiZc
    oeZeg2UHEyhVpiZc
    4n3IQK2nN6tFQpUj
    • Remove the three 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

  6. UhYICsOFlRrWZcTS
    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

  7. ZBGpOA5Fh1EflqcG
    • Remove the back panel away from the camera by applying pressure to it.

  8. KbUhphq6marbBrDR
    KbUhphq6marbBrDR
    sM1iUUciiLSlBXZ6
    • Set aside back panel for now.

    • Remove the final 4 mm Phillips #1 screw holding the screen in place. It is very small and hard to see.

  9. BuqgYAkq3pNa3nJf
    • Carefully apply pressure, away from the camera, to the screen to detach it from the body.

    • The white cord should still be connected to the body.

  10. QgaPnGFP6pJogVFt
    QgaPnGFP6pJogVFt
    NoHbaMCtHafrlZId
    • Lift the black clip upward.

    • With the clip up, pull the white cord to the left. This will detach the screen from the body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin Tew

Member since: 31/03/16

767 Reputation

0 comments