Introduction
-
-
Press the green release button on top of the side access panel.
-
Pull off the side access panel to get inside the computer.
-
-
-
Unlock the top chassis by moving the two green locking latches upward and outward.
-
Using the handle, gently swing the top chassis up and out until it rests firmly on the work surface.
-
-
-
Gently pry up the four tabs on the top side of the speaker bezel.
-
Swing the speaker bezel open.
-
Release the eight tabs on the bottom side of the speaker bezel and remove the bezel from the computer.
-
-
-
On the inside of the speaker bezel, press the two tabs inwards (left tab right, right tab left) holding the nameplate in the bezel.
-
Press the tabs from behind to pop out the nameplate.
-
To reassemble your device, follow these instructions in reverse order.