Introduction
Tools
-
-
Press the green release button on top of the side access panel.
-
Pull off the side access panel to get inside the computer.
-
-
-
Unlock the top chassis by moving the two green locking latches upward and outward.
-
Using the handle, gently swing the top chassis up and out until it rests firmly on the work surface.
-
-
-
Gently pry up the four tabs on the top side of the speaker bezel.
-
Swing the speaker bezel open.
-
Release the eight tabs on the bottom side of the speaker bezel and remove the bezel from the computer.
-
-
-
Insert the end of a bent paperclip or SIM eject tool into the small hole inside the speaker bezel.
-
Push it further into the hole to pop the Apple logo out of the speaker bezel.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.