Introduction
Tools
-
-
Press the green release button on top of the side access panel.
-
Pull off the side access panel to get inside the computer.
-
-
-
Gently pry up the tab on the left side of the floppy drive bezel.
-
Swing the bezel open.
-
Remove the bezel from the right edge of the floppy drive.
-
-
-
Using a Phillips screwdriver, remove the two floppy drive shield screws.
-
Remove the floppy drive shield.
-
-
-
Disconnect the floppy drive cable from the back of the floppy drive.
-
Slide the floppy drive carrier and drive out of the front of the computer.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.