Power Mac G5 Front Fan Assembly Replacement

Written By: Adam
  • Comments: 0
Power Mac G5 Front Fan Assembly Replacement

Difficulty

Very easy

Steps

6

Time Required

5 minutes

Introduction

Use this guide to replace the front fan assembly on your Power Mac G5.

  1. UaBGTOEf6dyVJEiV

    • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

    • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

  2. rBARHUQtVA6lfOWt

    • Remove all the cables, including the power cables before opening the unit.

  3. EfcrMHyp4XqEbYsn
    EfcrMHyp4XqEbYsn
    LG2YPVaHQQ1nWjIE

    • Lift the tab to unlock the side panel.

    • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

  4. mFQ5PLHCQCclToTc
    mFQ5PLHCQCclToTc
    GbBxDZVgNRe2CrnX
    SMxAYMZYyFRqRxWs

    • Remove the air deflector (the clear plastic cover) by pulling on the handle.

  5. IDAAGqatkHs6FhEn

    • Locate the front fan assembly.

  6. Ue42sEAaPLVThCVP

    • Pull the fan assembly out; it should slide out easily.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam

Member since: 22/01/10

831 Reputation

0 comments