Power Mac G4 Quicksilver Hard Drive Assembly Replacement

Written By: Ryan Bylard
  • Comments: 0
Power Mac G4 Quicksilver Hard Drive Assembly Replacement

Difficulty

Very easy

Steps

5

Time Required

No estimate

Introduction

This is meant to be a private prereq guide.

  1. siQhN4cavRPNHbEs

    • The hard drive is located in the back right corner of the case.

  2. jptKb6hb5eGAswAI

    • Remove the flat ribbon cable by pulling with substantial force.

  3. lFMtgQCKOKYhutEx

    • Remove the screw holding the hard drive to the computer.

  4. ggAxXEKMaGCPphft

    • Pull the drive up and out of the computer.

  5. Pqm6vHpAonPMHwMM

    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Bylard

Member since: 20/01/10

1325 Reputation

0 comments