Introduction

This guide details the removal of the main fan from the fan housing.

  1. usapiMdDDBFeDDhd
    usapiMdDDBFeDDhd
    6j1Fmc6PY2u6c6GG
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

    Fino a li lo intuisce anche un bambino. Io volevo sapere come levare l'altro sportello senza rompere niente. Ma una vodtra risposta non la vedo.

    giorgus -

  2. 1ku2GOoS4NCLKswc
    1ku2GOoS4NCLKswc
    rHNA1bZq1pQcp2yo
    • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

    • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

  3. mQG3N1UQ3S1neWK6
    • Remove the power cable from the fan and detach bracing.

  4. gZDWvIpPpvcKilQi
    • To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephen Scruggs

Member since: 20/01/10

2238 Reputation

0 comments