Power Mac G4 Cube Airport Card Replacement

Written By: Ryan Chun
  • Comments: 0
Power Mac G4 Cube Airport Card Replacement

Difficulty

Moderate

Steps

2

Time Required

5 minutes

Introduction

Installing the Airport Card involves removing the outer case.

  1. Hu5GL1ob6ErnEB6m
    Hu5GL1ob6ErnEB6m
    sajqXaBwftYnZI5N
    qD2EJfXRIZjAjv6g

    • Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.

    • Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. ShCvwvNOkRsBSowA
    ShCvwvNOkRsBSowA
    GEZ6VaDIAt2PGikd

    • Pull outwards on the antenna cable.

    • The cable should pop out of the card without much force.

    • Pull on the clear tab outwards to remove the existing AirPort card

    • Slide in the new AirPort card.

    • Reconnect the antenna cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Chun

Member since: 24/06/10

1076 Reputation

0 comments