Pokewalker Battery Replacement

Written By: Winni Stuart
  • Comments: 1
Pokewalker Battery Replacement

Difficulty

Easy

Steps

4

Time Required

10 - 15 minutes

Introduction

This is a short guide for replacing a pokewalker battery

  1. nN3jxsSVRcfVToBr

    • Locate the Screw on the Back of the Pokewalker.

  2. uLiVvSHpVwKxRioh

    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

  3. bAdE2DuE2K2MLKCZ

    • Remove the Rear Cover from the Device

  4. XAgEw1SA3odXKZ2E

    • Use the flat end of a Spudger to Remove the Battery

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Winni Stuart

Member since: 14/04/14

417 Reputation

One comment

The battery must be placed positive side facing up if I am correct.

I just dug my pokewalker out of my closet. Been years since it has been used. Putting in an effort to get it running again.

Thanks for the tutorial.

Jake Allen -