Plumbing replace Brita water filters with a better solution Replacement

Written By: Michael Williams
  • Comments: 0
Plumbing replace Brita water filters with a better solution Replacement

Difficulty

Moderate

Steps

3

Time Required

45 minutes

Introduction

  1. VZcQFhELX5NNdi3u

    • Cold water is the supply line is on the right. Turn it off before starting.

  2. wtxwyiSBKhalJNDV

    • Pentek 10" filter and slimline housing

    • 3/8 compression supply line and 3/8 faucet supply line

    • Filter wrench

    • 3/8" compression to 3/8" pipe thread fittings (two), 3/8"close nipple, and 3/8" female elbow (if needed). Total less than

  3. v5tRLpggZA2UyyXk

    • use teflon tape on male threads when assembling. do not overtighten.

    • Enjoy filtered water for less than a penny a gallon.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Michael Williams

Member since: 02/12/13

867 Reputation

0 comments