Introduction
If your headset had been working great but suddenly started producing static or distorted sounds, you may need to reset your headset. Follow these instructions:
-
-
Press and hold both the call control button and the listening volume/mute button for five seconds.
-
When the talk indicator light blinks, release both buttons.
-
4 comments
Great fix. I was about to spend $200 on a new set. Thanks.
acseko -
I had a constant buzzing sound from the unit. I did what you recommended and could not stop it. Then I discovered that my handset also had the same buzzing sound so I unplugged the phone line and power cord (to the main phone unit) and it cleared up!
Russ -
I've got a unit that is getting no sound to or from the earpiece at all, though the lifter still lifts when I hit the answer button. I'll try this reset before I order a replacement set.