Philips TAS7505 Battery Replacement

Written By: Frederick Jimenez

Comments: 5

Difficulty

Moderate

Steps

Time Required

15 - 30 minutes

Introduction

This guide provides detailed instructions on how to remove and replace the battery from your Philips TAS7505 Speaker. It is vital to understand that this procedure requires you to detach the outside shell of the speaker, which may not reattach well. Proceed with caution.

Replacing worn-out batteries is crucial to maintaining the longevity of your speaker. By replacing the battery, you can ensure that the speaker continues to function optimally and extends its lifespan. If you do not mind minor cosmetic changes to your speaker, this procedure should not cause any issues.

Tools

Parts

JBL Charge 4 Battery

Step 1

Remove the rubber dampener from the bottom of the speaker using your opening tool.
However, this will make it harder to replace the rubber dampener, and it may not stick. It is not necessary to the speaker's function.

Step 2

Remove the four Phillips #0 screws attached to the cover and remove with the opening tool.

add the screw removing picture.

Christopher Gonzalez -

circle the screws that need to be removed.

Christopher Gonzalez -

Step 3

Remove all Phillips #0 screws to remove the final layers to open the inside.

what are the screws being removed from?

Christopher Gonzalez -

also add the device with the battery inside along with the pieces removed.

Christopher Gonzalez -

Step 4

Remove the battery from the motherboard.
The cable that connects the battery to the speaker is attached to small pins. You can use your hands to wiggle the battery out.