Philips Sonicare Essence 1 Series Brush Head Replacement

Written By: Thomas DeReu

Comments: 6

Philips Sonicare Essence 1 Series Brush Head Replacement

Difficulty

Very easy

Steps

Time Required

30 seconds

Introduction

In this guide we will replace the brush head for the Philips Sonicare 1 series.

Step 1

Place one hand on the toothbrush handle and one on the toothbrush head.

Step 2

Separate the toothbrush head from the body by twisting it in a counter-clockwise direction.

Is there grease in the chamber that the head comes out of? Or is that old toothpaste gunk?

Demp Dempsey - 21/10/19

That does not tell me how to get the brush out. It doesn’t just pull out gently and I’m afraid to pull so hard I break it.

lori thrower - 21/12/19

After unscrewing the toothbrush head from the body, how do I get the brush out. It will not pull off.

shirley sanford - 10/03/20

After unscrewing the toothbrush head from the body how do I get the brush out

Amanda Crabtree - 13/07/20

Having the same issue cannot get the brush head out what do you need to do I see no replies from previous comments thank you

dorotheayordy - 26/12/20

The brush assembly just pulls out as shown. There is nothing holding it in place beyond the big plastic ring. The 'hidden' part with the magnets drops into the cavity where it is surrounded by the hidden coil that causes it to vibrate. If there is any drag it is because some toothpaste, etc, may have made its way in, but should not be a problem to simply wiggle. The toothbrush assembly is supposed to be replaced every 3 - 6 months following that same step.

William Toperzer -