Pentax Optio WG-2 Shutter and Power Button Replacement

Written By: Matthew Bessette
  • Comments: 0
Pentax Optio WG-2 Shutter and Power Button Replacement

Difficulty

Easy

Steps

2

Time Required

2 - 3 minutes

Introduction

Use this guide to replace the power and shutter buttons of the Pentax Optio WG-2.

  1. Rxt5UdFPkY4NUBmO

    • Use your finger to peel the grip off the top of the camera.

    • For best results, start from the right side of the camera, opposite from the buttons.

    • Once the grip is removed, you will most likely lose the water-tight seal.

  2. HssuWiVkR1BdgQUF

    • Use the tweezers to remove the two buttons from the top of the camera.

    • The buttons may fall out while removing the grip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Matthew Bessette

Member since: 04/03/16

658 Reputation

0 comments