Introduction
Most cameras have mounting brackets on the bottom side of the camera that allow the user to attach the camera to a tripod or other mounting device. These mounting brackets are very easy to cross thread or strip. This guide will help you replace the mounting bracket of the camera.
Tools
-
-
Remove the back panel by unscrewing the two Phillips head screws on the bottom of the camera towards the back.
-
Lift the back panel from the camera and set it aside.
-
-
-
Unscrew the Phillips head screw shown in the picture to remove the front panel.
-
Remove the front panel to expose the bracket at the bottom of the camera.
-
-
-
Pry the right side of the bracket up to allow you to grab the bracket with tweezers.
-
Grab the bracket with tweezers and slide it toward the battery door to remove it from the frame of the camera.
-
To reassemble your device, follow these instructions in reverse order.
