Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement

Locate the memory card and battery card latch on the bottom of the camera.

Slide the latch to the open position.

Open the battery latch, and slide the battery release lever to the right.

Remove the battery from the camera.

Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.

Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.

Remove the left side casing.

Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.

Remove the bottom right panel.

Gently remove the back casing.

Start at the bottom and carefully pry towards the top to get this piece free.

Gently lift up the LCD screen.

Using a plastic prying tool, flip up the latch that holds the thin ribbon in place.

It should fall out on its own or with a gentle tug.

Gently tug the thicker ribbon to remove it from its housing.

Carefully remove the upper assembly, which houses the buttons and the flash battery.

Remove the two 3mm screws.

Pry bars back gently as shown.

Fingers can be used but tool is shown for clarity.

After, releasing all the components, gently remove the flash assembly from the casing.

Remove the 1.2 mm screw from the settings wheel.

Replace buttons.

Replace the "On/ Off" button with the prongs facing away from the flash.