Introduction

This guide will show you how to replace the button pad on the Panasonic KX-TG6021M.

  1. iSsabMfm4rdhwOol
    iSsabMfm4rdhwOol
    FFjFmLR6Q1jcSVZB
    • Slide the back cover down towards the bottom of the phone to remove.

  2. JNH14LXHNgBEBJ4q
    JNH14LXHNgBEBJ4q
    Yj41c33PSheXrHax
    mn2mYXttOTh6YShh
    • Pull the top of the battery towards you to remove it from the phone.

  3. uJqAUKVSQoZXyMfW
    uJqAUKVSQoZXyMfW
    tTrpCL4fsouifhUi
    • Unscrew the two screws located at the bottom of the phone.

    • Use a PH00 Phillips head to remove the 9 mm screws.

  4. UfnSFeWLnUPbRnN5
    UfnSFeWLnUPbRnN5
    KNpaOBUefmaMXYSi
    DMRZkUeQv6OEJOJN
    • Separate the back cover from the front cover by using a wedge.

    • Remove the back cover from the front cover by pulling them apart.

  5. aRTFXeYJVDuHxIHF
    • Remove three screws on the motherboard.

    • Pull the phone face off of the motherboard.

  6. yVmRPXx2dR3JqkfN
    • Remove the button pad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Leah Meador

Member since: 24/10/16

301 Reputation

0 comments