Palm Treo 700P Antenna Replacement

Written By: John Rainier Solanzo
  • Comments: 0
Palm Treo 700P Antenna Replacement

Difficulty

Moderate

Steps

8

Time Required

3 - 5 minutes

Introduction

Follow this guide to access and remove the antenna of the cell phone.

  1. UOX5gc5TRsGJnGjr
    UOX5gc5TRsGJnGjr
    Kj6VPuIKIU5o1G6d
    KIKPyYCigtOUA2uM

    • Press the button located just above the Sprint™ logo and then slide the cover down.

  2. fEhBWSNIPBOKLXi3
    fEhBWSNIPBOKLXi3
    wtPwsS4THsNOrAED

    • Use the small notch on the left hand side of the phone to remove the battery.

  3. aFHJbeQlAoxWlDRM

    • Remove the stylus from the phone.

  4. kBjILK5uVEv4CB2M

    • After removing the battery and stylus, unscrew the 5 Torx screws using a T-5 Torx screw driver.

  5. 4LCTQWs4hym1JHed

    • Using the spudger, remove the small rubberized patch under the antenna.

  6. UK3W2brMNCYrlyQq

    • Unscrew the last two screws using the same T-5 Torx screw driver.

  7. BgteidDfhEc1cAWR

    • Using the plastic opening tool, carefully pry open the back case to loosen the antenna.

  8. YaVEUeOWb5ObHwX3

    • The antenna will now be loose, gently pull the antenna out of the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

John Rainier Solanzo

Member since: 17/04/12

7 Reputation

0 comments