One Education Infinity:One Antenna Prerequisite

Written By: Taylor Bratsch
  • Comments: 0
One Education Infinity:One Antenna Prerequisite

Difficulty

Moderate

Steps

5

Time Required

10 - 15 minutes

Introduction

This guide is a prerequisite demonstrating how to disconnect the antenna connection to the motherboard in the One Education Infinity:One laptop.

  1. kLKwDj2aHVagP5Mg
    kLKwDj2aHVagP5Mg
    33FbsZ1kP56Uhl43

    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. kOi3RhLhuLBFkGoV
    kOi3RhLhuLBFkGoV
    AJludX4VhiOctykA
    SVLNiUhhv5KfEyDB

    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. 6TMAWcUXDS3hbJNe
    6TMAWcUXDS3hbJNe
    V6DXuayK2kH1ZVt2
    mIXPEPIdhpgEmltj

    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. HHywNc2uwuE1KqUN

    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. PAEEOhwlBtlqdHhT
    PAEEOhwlBtlqdHhT
    NZOkEllDXUB5YxCS

    • Use ESD safe tweezers to disconnect the antenna from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Taylor Bratsch

Member since: 06/09/16

5730 Reputation

0 comments