One Education Infinity Back Case Replacement

Written By: Sarah Westberg
  • Comments: 0
One Education Infinity Back Case Replacement

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

If you are going to replace any of the components in the One Education Infinity, you will need to remove the back case first. After removing the back case, remove the battery as a safety precaution to prevent the risk of electric shock as you work on your device (even if you are only replacing the display assembly).

  1. waxMbpKwXhEKYIyw
    waxMbpKwXhEKYIyw
    JLklTvhYq2yCETRi
    KDffj6i4mpsdUlGw

    • Always power off your device before beginning disassembly.

    • Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

  2. BQuEQhRH2jPfGZVG
    BQuEQhRH2jPfGZVG
    G6SZAalyN2tDbcdB

    • Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

  3. yCKnhTxU53KWb1f4
    yCKnhTxU53KWb1f4
    ITbeNq3SECle4Abc
    RcSAqIOWgLUZ5ELj

    • Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.

    • Lift the back case off of the device.

    • Removing the back may create a loud snapping noise.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sarah Westberg

Member since: 11/03/19

22758 Reputation

0 comments