Olympus VR-350 Front Plate Replacement

Written By: Adri
  • Comments: 0
Olympus VR-350 Front Plate Replacement

Difficulty

Moderate

Steps

3

Time Required

5 minutes

Introduction

This guide will show you how to replace the front plate of your camera. This can help you personalize your camera, and it is also an important first step to any other repairs.

  1. v2IDfjfmWpgNqHB6
    v2IDfjfmWpgNqHB6
    VyrNUD2NDELYlbpI

    • Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.

  2. uRSrihr2sCXj3utt

    • Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.

  3. Ns2XHBZMvOFb5AIN
    Ns2XHBZMvOFb5AIN
    Bn6bAdTRRgU4MOBg
    QRj5oxsRFMKBiTpZ

    • Use the plastic opening tools and your fingers to pry the front plate from the camera.

    • You might need to open the battery cover to remove the front plate.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adri

Member since: 23/02/15

456 Reputation

0 comments