Olympus D590 Face Plate Replacement

Written By: Katie
  • Comments: 0
Olympus D590 Face Plate Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 25 minutes

Introduction

Step-by-step Instruction Guide

Olympus D590 Camera Faceplate Removal

Access of internal housing compartment body

  1. tLRBDCXKkV3QFXxf

    • Remove five baseplate screws using a Phillips #00 screwdriver.

  2. xviXHOyDMDQNLxqv

    • Press and slide the battery cover retainer clip to the left. Use tweezers to lift the battery cover away.

  3. HbI3KlmFdDtXiqWg

    • Remove the single screw from the battery housing using a Phillips #00 screwdriver.

  4. w6ZLPFeFtDTHba5h

    • Using tweezers, lift the rubber plate to expose the ports.

  5. lWpwRWBLQLbGXt4r

    • Remove two screws from the ports using a Phillips #00 screwdriver.

  6. TrqgK4nV5sZBYJOi

    • Use a spudger to pry the faceplate away from the rest of the camera.

  7. cCr4mQVeNcIX6Qbl

    • To avoid disconnection of the connector line to the motherboard, use caution when pulling faceplate away from camera case.

    • Damage to the connector line will prevent the on/off power switch's operational function.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Katie

Member since: 15/04/10

31 Reputation

0 comments