Olympus 850SW Battery Replacement

Written By: Emma Fincken
  • Comments: 0
Olympus 850SW Battery Replacement

Difficulty

Very easy

Steps

7

Time Required

1 - 5 minutes

Introduction

Ensure you have a fully charged battery, and that it is the correct battery if you have purchased a new one. This camera will accept a rechargeable Olympus LI-42B Lithium-Ion battery.

  1. YILPtjpUDO6yQ3nl

    • Locate the battery compartment on the bottom panel of the camera.

  2. nbTBladRDbZhv6aA
    nbTBladRDbZhv6aA
    Ni1jrmVidAgNr2Yb

    • Using a PH00 Phillips Screwdriver, unscrew the one screw located on the latch.

  3. ZXmtR54lc1tTUF2u
    ZXmtR54lc1tTUF2u
    cjB6QsVipvPVBvRx
    x2ytUTWxXGDkqYSw

    • Find the arrows on the compartment, remove the small black plastic piece, and release the latch.

  4. CDcdu5hKyXQH3bSo

    • Allow the latch to completely open and insert the battery, with the writing side up.

    • The battery slot is the bigger slot. The smaller slot is for the memory card.

  5. cTQNbhkHKH4fdZ6w

    • Close the latch. You will hear a click when the compartment is fully closed.

  6. fROtVZ65oJYKqcD1

    • Place the small black piece back in its' place.

  7. HOqCTEYGfgeKKAVN

    • Place the metal cover back over the closed latch, and screw the screw back in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Emma Fincken

Member since: 30/01/15

500 Reputation

0 comments