Novatel MiFi 2200 Case Replacement

Written By: Justin Russo
  • Comments: 1
Novatel MiFi 2200 Case Replacement

Difficulty

Moderate

Steps

4

Time Required

5 minutes

Introduction

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

  1. sMXSLIpXVlinO5JA

    • Remove the rear cover by pressing down on the cover and pulling it away from the device.

  2. JpioKnSx5BuPbcV2

    • Place your finger on the back of the battery located near the edge of the device.

    • Push your finger into the battery and lift up to pop the battery out of the device.

  3. 1X2C4nEtvgmLbwpX

    • Using a metal spudger, pry open the device around the seam between the front and back cover.

    • It may be difficult to split apart, so use force with caution.

    • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

  4. WLkcKPBZcUQ2GQsD

    • Once the seal has been broken all the way around, open the cases using your hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Justin Russo

Member since: 16/04/12

196 Reputation

One comment

If case gets damaged, is there a place to but the case

Snehraj Merchant -