Nostalgia Electrics PCM805 Base Removal

Written By: Carlton
  • Comments: 0
Nostalgia Electrics PCM805 Base Removal

Difficulty

Easy

Steps

2

Time Required

10 minutes

Introduction

  1. iiLSZ6eBRmIAZdKU
    iiLSZ6eBRmIAZdKU
    62gqUaTqraRukNwk

    • Unplug the device before following this guide.

    • First, place the device on its side, making sure the switch is not facing down.

    • Remove the eight 12mm Phillips #02 screws from the base.

  2. iDkKKOYTSlDkCh6w

    • Gently separate the panel from the device.

    • Be sure not to tug at the wires that are still connected.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carlton

Member since: 13/01/15

672 Reputation

0 comments