Nostalgia Chocolate Fondue Fountain CFF965 Base Bowl Replacement

Written By: Kristen Gismondi
  • Comments: 2
Nostalgia Chocolate Fondue Fountain CFF965 Base Bowl Replacement

Difficulty

Moderate

Steps

7

Time Required

No estimate

Introduction

  1. 6fZhrCKGCxNOygK1

    • Lift the tiered tower from the base bowl.

  2. rQCNIYBrTeCtGeK5
    rQCNIYBrTeCtGeK5
    6cD5SIXN4dZjkILb

    • Use your hands to lift up the auger (the long black metal spiral) away from the base bowl.

    How can I order parts I need the auger

    Veronica A Guerrero -

    2. Auger washer size

    aahacateringservice -

  3. VJQKiodNZNZsPUx1

    • Flip over the device so that the bowl is now face down.

    • Use your hands to unscrew both 21.3mm screws.

  4. IITLnmvlDwYAHFOS
    IITLnmvlDwYAHFOS
    eZOHkw5T3oHdoKFc
    SmRDjVmkKrH1BpiT

    • Unscrew all three 14.2 mm screws with a Phillips #2 screwdriver.

    • Unscrew the 9.1 mm screw near the switch with a Phillips #2 screwdriver.

    • Unscrew the two 14.2 mm spanner screws using a spanner screwdriver (size 6).

  5. oJjIuWxMuJBfuAvL
    oJjIuWxMuJBfuAvL
    KcSQK5jvdYGvCLLK

    • Use your hands to pull up on the baseplate to remove it.

    • Pull the panel with the switch on it upwards.

  6. WpwvYTK4hxMUMjJZ

    • Unscrew the two 22.1 mm machine screws that secure the motor with a Phillips #2 screwdriver.

    • Remove their adjoining 5.9 mm washers by hand.

  7. snKWWWAZW4KV3auB
    snKWWWAZW4KV3auB
    EHcBHhdDyVbvtJMb
    TxXWqplbk1qTTTKe

    • Unscrew the three 25.4 mm Phillips #2 sheet metal screws that connect the base bowl to the white plastic structure.

    • When unscrewing, make sure to hold the metal tower studs on the opposite side of the base bowl (see the second picture). This will make it easier to unscrew the screws.

    • Flip the base over and remove the base bowl by hand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

81237 Reputation

0 comments