Introduction
This guide is to instruct the reader how to disassemble the Nokia 6310i so that they can access the screen.
-
-
Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.
-
-
-
Remove the screw holding the antenna to the circuit board.
-
Carefully lift off the antenna from the circuit board.
-
-
-
Remove the screen from the motherboard by carefully pushing the four tabs around the edge.
-
Carefully pull the screen away from the motherboard.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Needs updating with a picture with no SIM card.
Mustafa -
A comment for anyone wanting to clean the metal contacts to improve keypad response, make sure you spray iso alcohol onto a lint free cloth and wipe the contacts, not onto the device itself and definitely not onto the LCD screen, as it can leave a marl on the screen. Luckily it evaporated eventually but only after 48hrs...
John -