Nintendo Wii Remote Speaker Replacement

Written By: Emily
  • Comments: 4
Nintendo Wii Remote Speaker Replacement

Difficulty

Moderate

Steps

5

Time Required

5 minutes

Introduction

Removing the speaker requires opening the case of the Wii Remote.

  1. CJPWTUaLIJOrlTjL
    CJPWTUaLIJOrlTjL
    IKLUxxGL3i16PRVa

    • Flip the Wii Remote over so the battery cover faces you.

    • Push up on the bottom tab.

    • Remove the battery cover.

  2. SpfsueKLnC6dearn

    • Remove the first battery by pressing down on the positive end and pulling the battery out.

    • Remove the second battery by pushing up on the positive end and pulling the battery out.

  3. KRhx6OCSHj1kHfvi

    • Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.

    • Repeat with the two bottom screws.

  4. I6UxdQOmurieZqPI
    I6UxdQOmurieZqPI
    PgoiMal1wGhU3rSa

    • With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.

    • These tabs are breakable. However, if the tabs are broken the controller will still function.

    • Open the front plate like a book.

    • Small parts may fall out as you open the front plate.

    Mine is not opening like a book? What do I do?

    Micah Thompson -

    It stops short of explaining replacing rechargeable battery. Unless you’re referring to the AA’s which don’t involve removing cover

    Sticky Insides -

  5. PndsxeqA3YFZGh6e
    PndsxeqA3YFZGh6e
    u4Fi32yOBGASMMly
    F6chOF2ohDvZJPmP

    • Place the plastic opening tool between the edge of the speaker and the wii remote.

    • Gently lift the speaker out of the body of the Wii remote.

    In my Wii controller, the speaker is connected to two cables instead of touching the motherboard.

    Santi12008 -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Emily

Member since: 14/04/13

1479 Reputation

One comment

Thank you, u help me to fix it.

joon lew -