Introduction

This guide will assist in removing the top cover of the Nintendo 64.

  1. 2Ih1yBMRhFX6oJXL
    • Remove the expansion pack cover by pushing in the tab and pulling out.

  2. MgfU6iWKEtQAW2Ua
    • If your system uses a jumper pack, the same procedure applies to remove it.

    • A small spoon can be used in place of a spudger.

    • Lever the expansion pack out using a metal spudger.

  3. PFLKcDxe1FkJIJSa
    • Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

  4. 24Bj6JSZV2eId5oE
    • Remove the two front feet of the N64.

  5. wmroNcWfbILLSvRR
    • Rotate to top side up and lift off top cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

bbdiamond13

Member since: 04/11/09

387 Reputation

0 comments