Nikon D90 Top Flash Casing Replacement

Written By: Matthew Grota
  • Comments: 0
Nikon D90 Top Flash Casing Replacement

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

Prerequisite Only

  1. koZBElMjh2rHOkqK
    koZBElMjh2rHOkqK
    ZdAMSKAKnOybqISY
    PFxW2wrcWIUn5mvW

    • Use a plastic opening tool to lift up the flash.

  2. YWiYJDOXBvXBEirE
    YWiYJDOXBvXBEirE
    2qfSQJuWohkwATmm

    • Using a PH00 screwdriver, remove the two 5.3 mm Phillips screws from the flash casing.

    • Be careful not to strip the screw heads.

  3. ulBmOxtMRT3GGA62
    ulBmOxtMRT3GGA62
    qFF5CkVmvtdcquuu
    jjRHcEUByMTK66OK

    • Use a plastic opening tool and carefully pry open the top casing of the flash.

    • Then, lift off the top casing of the flash.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Matthew Grota

Member since: 16/10/14

586 Reputation

0 comments