Introduction

The bottom casing of the Nikon D90 can sometimes be scuffed up and damaged. This guide shows how to replace the bottom casing of the Nikon D90. Be forewarned, the screws can be easily be stripped so be careful.

  1. C3gvhqTy5jCmwDsl
    • Turn the camera so the bottom casing is facing up.

  2. MQKSkPemkNMDMZZm
    MQKSkPemkNMDMZZm
    XLCqlt1YiFyAYKYb
    • Next, use a PH00 screwdriver to remove the screws from the bottom casing.

    • Remove the four 5.3 mm Phillips screws.

    • Remove the three other 6.3 mm Phillips screws.

    • Be careful not to strip the screws.

  3. DlJqIcKNH4VgJHDA
    DlJqIcKNH4VgJHDA
    pnMI5mo1JEiwvSyl
    • Next, use a plastic opening tool and carefully pop off the bottom case.

    • Then, lift and remove the bottom case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Grota

Member since: 16/10/14

586 Reputation

0 comments