Nikon Coolpix P100 Back Buttons Replacement

Written By: Nghiem Ngo
  • Comments: 0
Nikon Coolpix P100 Back Buttons Replacement

Difficulty

Difficult

Steps

16

Time Required

15 - 30 minutes

Introduction

If you have a jammed button or if you simply want to replace a part on your Nikon Coolpix P100 camera, then this guide is perfect for you! This guide will help users easily replace a broken back button on your Nikon Coolpix P100 camera.The only required tools you need are a Phillips #00 Screwdriver and a iFixit Opening Tool.

Before using this guide make sure that the camera is powered off!

  1. DSuB2eILAEZVBAsA

    • Turn the front of the camera toward you.

  2. 4GJPNbKNnXwwfDsd
    4GJPNbKNnXwwfDsd
    SQdgDPFCMuG121Xv
    3OZGkxjyP5rjt1bH

    • On the left side of the camera, remove two screws using a Phillips #00 screwdriver.

  3. ahAbLVRBeEviIylZ

    • On the right side of the camera, remove the first visible screw.

  4. k5b1XGJjYHxGn3IK

    • Lift the HDMI and A/V OUT cover to access the hidden screw.

  5. WRWG1cKAtuaEa6Dr

    • Flip the camera upside down and remove the seven marked screws.

  6. g2VJPWSWZpUlAgcM
    g2VJPWSWZpUlAgcM
    QnFash6FR5ImlABo

    • Remove the two screws hidden underneath the display panel.

  7. dEGPSrSUZHiFtdni
    dEGPSrSUZHiFtdni
    lWV5F4BvhftXZeWu
    i4QbRgeyigXM2A2H

    • Use a plastic opening tool to gently loosen up the sides of the camera.

  8. 1SRnfXLZhuI6oFbo
    1SRnfXLZhuI6oFbo
    SljrFMnKEpEkZYPG

    • Carefully open the camera.

    • There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding.

  9. UBXvu6ymhWCRvyW5
    UBXvu6ymhWCRvyW5
    RTBQw4wVu3jAsrNH

    • This is the cover that houses the back buttons of the camera. Turn it around.

  10. YCvCrtIEWttMdWhC

    • Remove the six indicated screws.

  11. KojKE2NfMOprXRi6
    KojKE2NfMOprXRi6
    GDjCHLbpLBSk4KTL

    • Use a plastic opening tool to lift the metal plate and set it aside.

  12. wRYjbUGOHEB6SmyR
    wRYjbUGOHEB6SmyR
    AoxkUyAEqYeMki6t
    B6unmlJIXp2pgoLL

    • Turn the cover around and push against the buttons.

  13. c1HvXDULduSk4FiK

    • Now you have partial access to one set of buttons.

  14. shN5qkh5gtBfQntT

    • Find the last set of removal buttons on the bottom left.

  15. vKvNATCUQokqDlWT

    • Remove the screw.

  16. iYEHgOJLG3ngdRNH
    iYEHgOJLG3ngdRNH
    lmxXN55WiBHoMfJC

    • Use a plastic opening tool to remove the button.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nghiem Ngo

Member since: 15/01/15

309 Reputation

0 comments