Nexus One Battery Housing Replacement

Written By: Niklas Johnson
  • Comments: 1
Nexus One Battery Housing Replacement

Difficulty

Moderate

Steps

10

Time Required

10 - 15 minutes

Introduction

installing the battery housing

  1. uLlMFMhZqIIv3caX
    uLlMFMhZqIIv3caX
    VvvWIQV4IhighMT5

    • Using two fingers, push up on the rear cover.

  2. W1WIrx2VbRpWGxKX

    • The rear cover slides up and off.

  3. DXcrcy1T6vY3HEWU

    • Using the plastic opening tools, pry the left bottom corner of the battery up.

  4. oHgCrbeRKYNsKGyW

    • Pull the battery up and out.

  5. LEk4TtIlJpNBnkLG

    • Remove the two Torx T5 screws.

    • Remove the one Philips #00 screw.

    #0 Phillis screw

    skuhry -

  6. AVHTJRTTmHURrqWr
    AVHTJRTTmHURrqWr
    DFrOaUx4hjItP3UE

    • Using the plastic opening tool, pry up the battery housing upwards.

    • Push pry tool down, undoing the plastic tab.

  7. fBve6wgcClcIKG5q
    fBve6wgcClcIKG5q
    d6FAlJcMTtpDLdHk

    • Pry the upper left tab open on the battery housing.

  8. ZYjsMVCidphXMyax
    ZYjsMVCidphXMyax
    XHJ5vDEoxHwmFQDR

    • Pry the top tab of the battery housing.

  9. IqJXdHPhdvbQoDe2
    IqJXdHPhdvbQoDe2
    EP3MoAITbalwK6PZ

    • Pry the right side tab of the battery housing.

  10. crX1ZluSiKZIiaWi
    crX1ZluSiKZIiaWi
    RZnGp4KEQgTZDiAU

    • Pull up on the battery housing.

    • Slide the battery housing out to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Niklas Johnson

Member since: 01/02/12

1207 Reputation

0 comments