Introduction

Today we are going to repair the speaker system in the phone. This may be due to simple wire disconnections and may require soldering or a replacement of the system.

  1. B3sbjw4XfDPB3fU4
    B3sbjw4XfDPB3fU4
    soyvh4SFRYTJJmbX
    kQokZdYQqTCIV3sO
    • Slide the notch downward while pulling the back cover off to remove it.

  2. FYQZGnC5CVIoEHJY
    FYQZGnC5CVIoEHJY
    5tOoqOlfKhhmNMCJ
    axvZcFdMFsZUOPlQ
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

  3. hwGeEUCq1SWp1PFO
    hwGeEUCq1SWp1PFO
    AMsWkdq2vRbA1xhc
    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

  4. xmdGvJIgVFcl1lHQ
    xmdGvJIgVFcl1lHQ
    cZj4KhT3A2YCeT2m
    vC3nWFA1Z5CAPn3R
    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

  5. 6Vs6TlIDFHlG3mA4
    6Vs6TlIDFHlG3mA4
    CkbgjRhIABOuONSR
    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

  6. Ovs5QQYS4H5Mldc2
    Ovs5QQYS4H5Mldc2
    OcJbEoYUIH2yVedE
    p1rJLQsNwZndaV5g
    • Carefully pry off the connection between the headphone jack and logic board.

  7. DhjVDjmiYAqThVCH
    DhjVDjmiYAqThVCH
    x4tRT2q4G4nTcHeD
    MssJRNhXlVG4lAvf
    • Use the prying tools to wedge out the circular part of the speaker system.

    • Carefully pull out the wiring and circuit board attached to the speaker system using a prying tool or tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jorge

Member since: 14/04/10

4 Reputation

0 comments