Motorola XOOM 2 Media Edition Back Facing Camera Replacement

Written By: Jillian Cain
  • Comments: 0
Motorola XOOM 2 Media Edition Back Facing Camera Replacement

Difficulty

Easy

Steps

5

Time Required

3 minutes

Introduction

Having troubles with your back camera not working? Here is a guide to replace it!

  1. aYSSjG5fJJVp6UXJ
    aYSSjG5fJJVp6UXJ
    MJjoFw4MdSUwOsPl

    • Power off the device before beginning disassembly.

    • Remove six 2.7mm Torx #3 screws.

  2. 2T4efOVfiQQATokE
    2T4efOVfiQQATokE
    JNWRwp1mE6ywHNIR

    • There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.

    • Pry off the back panel using a plastic opening tool.

    • Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

  3. 4mEaSTtVQEvXHhii
    4mEaSTtVQEvXHhii
    VJ3XcfRHgfenEVbh
    JsWUvDJeEKrdfcyo

    • Pry off the black cover gradually using a plastic opening tool.

  4. 4QdcN63ZYMjOLKYG

    • Gently remove the blue tape near the camera using the tweezers.

  5. oNtO4wPjyw1JKCVW

    • Using the tweezers, remove the camera by grabbing the metal and pulling it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jillian Cain

Member since: 28/09/16

319 Reputation

0 comments