Introduction
This process involves first removing the battery, outer case, and motherboard. After, the keypad can be easily removed.
Tools
-
-
Hold the phone and pull the back latch down towards the bottom.
-
Remove the back panel by releasing the latch and lifting from the top.
-
-
-
Once the battery is out, unscrew the six 7.0 mm screws with T-6 screwdriver.
-
Once the screws are removed, simply lift the back panel off
-
-
-
Peel the keypad from the front case.
-
The keypad may be stuck either to the logic board, below the screen, or the phone case itself.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
