Moosoo XL-618A Motherboard Replacement

Written By: Ashtyn
  • Comments: 0
Moosoo XL-618A Motherboard Replacement

Difficulty

Moderate

Steps

3

Time Required

5 minutes

Introduction

If your Moosoo XL-618A vacuum is not turning on, you may have an issue with the motherboard. The motherboard is where the technological components of the vacuum come together and are powered. If you find that your vacuum is having technological issues, follow this guide on how to replace it.

  1. YVmeJBtFDvUn1vFZ
    YVmeJBtFDvUn1vFZ
    IgGQpd21rD4lGCUZ

    • Remove all nine 16 mm screws from the top motor with the Phillips #1 screwdriver.

  2. RfRcOpNWsYPjgekZ
    RfRcOpNWsYPjgekZ
    WSBjDUZWleehAYKp

    • Using a spudger, open the device along the small lines that are visible to you. Go on to pry off all other detachable objects and set aside.

    • Make sure to not go too far as this could further damage the device.

  3. Bw3IQACQDHUSYDvn

    • Pull the motherboard underneath the top handle of the top motor out and remove the connected wires. Then replace it with a new motherboard.

    • Be careful with the wires so that they don't get damaged in the process.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ashtyn

Member since: 20/09/23

489 Reputation

0 comments