Minolta Maxxum STsi Tripod Socket Replacement

Written By: Jacobe Labog
  • Comments: 0
Minolta Maxxum STsi Tripod Socket Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

If the tripod socket is broken, the camera will be unable to connect to its tripod. This guide will show you how to replace the tripod socket for your Minolta Maxxum Stsi.

  1. itZI1OGOhVtAXl5Q

    • Remove the seven black Phillips #00 5.0 mm screws.

  2. TVAJXxGAbXHcvhPG

    • Gently remove the bottom panel using your fingers.

  3. arRI6dSXLYHGqdLe

    • Remove the three black Phillips #00 6.25 mm screws from the tripod socket to remove the tripod socket.

  4. QAb4Yp1WFoqUKcVk

    • Use tweezers to gently remove the tripod socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacobe Labog

Member since: 02/05/15

301 Reputation

0 comments