Minolta Maxxum STsi Main Battery Replacement

Written By: Conner Lawston
  • Comments: 3
Minolta Maxxum STsi Main Battery Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

If the camera seems to have lost power, it is necessary to replace the main battery. This can be accomplished in a couple simple steps.

Tools

  1. T23EedZ3fAxVp3VE

    • Use the edge of a coin to twist open the battery compartment on the bottom of the camera. (Twist counterclockwise)

    My used one had a pair of CR2 batteries in it, not a AA battery.

    Please revisit the battery type.

    W. S. SCOTT BOYD -

  2. O1uVgZLaYuPmaqB2

    • When the compartment opens, pull the AA battery out of its slot.

    My used one had a pair of CR2 batteries in it, not a AA battery.

    Please revisit the battery type.

    W. S. SCOTT BOYD -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Conner Lawston

Member since: 21/04/15

219 Reputation

One comment

Minolta STsi MAXXUM will not turn on with new AA batt installed. HELP!!

Ron Torkelson -