Mark your Opening Picks at 5 mm

Written By: Clay Eickemeyer

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

This guide shows a helpful tip to prevent damaging sensitive cables or components in your device as you slice adhesive.

If inserted too far, an opening pick can damage your device. Follow this step to mark your pick and prevent damage.
Measure 5 mm from the tip and mark the opening pick with a permanent marker.
You can also mark the other corners of the pick with different measurements.
Alternatively, tape a coin to a pick 5 mm from the tip.

Member since: 19/09/22

65196 Reputation