Mantis Tiller 7566 2017 Carburetor Assembly Replacement

Written By: Trevor A
  • Comments: 1
Mantis Tiller 7566 2017 Carburetor Assembly Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

  1. Iabq14XNqLYb26Y5
    Iabq14XNqLYb26Y5
    MkKMkwSJDM3Gkejj

    • Remove the air filter cover.

  2. IGrJjohAMneOUWAg
    IGrJjohAMneOUWAg
    ATNJarwojEZ6IDYp

    • Remove two 5/16 standard nuts under the air cover.

    • Remove the last two bolts pictured with a 5/32 Allen wrench.

    • Note the order you remove the bolts. The top is usually longer than the bottom.

  3. L5Tyo2TCHwFaqXrL
    L5Tyo2TCHwFaqXrL
    eQ4y53jCLgheniJs

    • Remove old carburetor and install the new one. Remove the throttle cable and reinstall with needle nose pliers. Tighten throttle cable to carb part #16100-Z0Z-034

  4. B2CYPmBolWORMUTK

    • Reassemble and test throttle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Trevor A

Member since: 16/09/21

1315 Reputation

One comment

whats the part number

ROGELIO -