MacBook Pro 17" Unibody Camera Board Assembly Replacement

Written By: Brett Hartt
  • Comments: 0
MacBook Pro 17" Unibody Camera Board Assembly Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

  1. pKXkxaLOnmEH5Zdt

    • Remove the two 2.7 mm Phillips #00 screws securing the camera board to the rear display bezel.

  2. gCi6i5QgSF3gMqSx

    • Lift and remove the camera assembly out of the rear display bezel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brett Hartt

Member since: 13/04/10

127755 Reputation

0 comments