MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement

Written By: Walter Galan
  • Comments: 3
MacBook Pro 15" Unibody Mid 2010 Hard Drive Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

This guide is an internal guide used as a prereq.

  1. sMEoM3vUMfDX1WrE

    • Remove two Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive to the hard drive bracket.

  2. BaLsEQXwHYTUyHVN

    • Lift the the retaining bracket out of the upper case.

    the the retaining bracket?

    Dave Gómez -

  3. fL4dQxFDdTmYgUSM

    • Lift the hard drive by its pull tab and pull it out of the chassis, minding the cable attaching it to the computer.

    Be VERY careful when you are lifting up the drive. Otherwise, you'll need to buy a new hard drive/IR sensory cable! Learn from my fail!

    goodski -

    After having changed the drive my disk works some times only, other times not. Some times it will boot other times not. I see that the sleep indicator is not working. Might have damaged the cable? Thought I was really careful when changing the drive.

    Eivind Johansen -

  4. SvDxteKHMETOFuQs
    SvDxteKHMETOFuQs
    Qv2kAYMOLXWgBdDk

    • Remove the hard drive cable by pulling its connector straight away from the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

694047 Reputation

0 comments