Introduction
Accessing the RAM in this computer is straightforward and requires minimal disassembly.
Tools
Parts
-
-
Remove the following ten screws securing the lower case to the upper case:
-
Seven 3 mm Phillips screws.
-
Three 13.5 mm Phillips screws.
-
-
-
Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
-
Remove the lower case and set it aside.
-
-
-
Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.
-
After the RAM chip has popped up, pull it straight out of its socket.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
How is this easier than removing a drive? Its both relatively easy. Otherwise good guides.
Jr. -