MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement

Written By: Walter Galan
  • Comments: 0
MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Prereq for removing the I/O board.

  1. ZFA4JklFPsGbEUbw

    • Remove the single 2.7 mm T5 Torx screw securing the AirPort board to the I/O board.

  2. AksHUHLaCt3YnQcg
    AksHUHLaCt3YnQcg
    piwekcwhNDtWbY6C
    Oaud1utQqAtFRAQa

    • Use the flat end of a spudger to pry and disconnect the three antenna cable connectors from the AirPort board.

    • The three cables are coded with black sleeves of different lengths. During reassembly:

    • Connect the long-sleeved cable to the center socket.

    • The short-sleeved cable connects next to the screw.

    • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

  3. 4lsiIG3xLaWceBBP
    4lsiIG3xLaWceBBP
    io6ckDGKBW2Hk16u

    • Move the antenna cables aside, clear of the AirPort board.

  4. eSWyoOE2U6ESxAFb
    eSWyoOE2U6ESxAFb
    cCigkp2CvVvEKipR

    • Pull the AirPort board straight out of its socket on the I/O board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

694047 Reputation

0 comments