Introduction

If your MSI GS66 Stealth laptop (model 11UE-007) is having problems with distorted sound, no sound at all or sound loss of any kind from your speakers, this guide is here to help! Broken speakers are a frequent problem with this laptop and are an essential part of any laptop.

Broken speakers can be a result of many different reasons for example, dropping the laptop, water damage, the volume being maxed regularly or even something as small as debris. This guide will take a step-by-step process in the replacement of ths speakers in the MSI GS66 Stealth laptop.

  1. ypKIZmHabAD5bBep
    • Orient your laptop so that the bottom is facing up and the hinge is away from yourself.

    • Make sure to unplug device.

  2. IRGyJDtTPPdm2Q5a
    • Identify the nine screws around the perimeter. One screw will be under the factory seal sticker.

  3. oqftCgsgg4R1GDAS
    • Remove eight 10 mm Phillips #1 screws.

  4. Fgct3TIST2iW2BIV
    • Remove one 7 mm Phillips #1 screw from the center bottom of backplate.

  5. LDdKfelLhXHcsWjB
    LDdKfelLhXHcsWjB
    Wdi2GHoQXj3FvWsA
    orCTCVTgZVJYYNpg
    • Use the tip of the blue plastic opening tool to slip between the backplate and the body of the laptop at the hinge side.

    • Wiggle the blue plastic opening tool as you slide it around the perimeter of the backplate to separate is from the body of the laptop.

  6. HNx4lZPJLCc1WIXV
    • Peal back metallic tape on the right side of the USB port.

  7. udfFopASQSuMZ4Ss
    udfFopASQSuMZ4Ss
    ddH1CjJgjRnwgv4k
    • Remove three 6 mm Phillips #1 screws.

  8. 3ETPHlIPTWTHKPXR
    • Use the tip of the spudger or your fingernail to gently push out the white connector.

  9. h1pSywAuNDbHRX2U
    h1pSywAuNDbHRX2U
    6GPeJJhT6qouCTVs
    • Remove the battery from the device.

  10. rGrqLoYToJI2Bj5b
    rGrqLoYToJI2Bj5b
    oPpWlXVhnTSAgUAp
    • Disconnect the speaker power using the tip of the spudger or fingernail to gently push on either side of the connector.

  11. YDt3JqYNvo2BtOUL
    YDt3JqYNvo2BtOUL
    XicPwDljSDRfb3AD
    • Lift up the clip using the spudger.

    • Pull out the ribbon cable away from the clips.

  12. M6KSKeWP531KviMA
    M6KSKeWP531KviMA
    rgQoXMiVCx3IdQyX
    • Remove the wire from the channel it's sitting in.

  13. OWKeS3FFPpeCmITo
    OWKeS3FFPpeCmITo
    wKlkWY6jeCRTvboY
    1tFgktlByUOoCm4G
    • Lift up the left and right speakers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alex Robinson

Member since: 06/09/23

1018 Reputation

0 comments