Introduction
Tools
-
-
Flip the mouse over to gain access to the bottom.
-
Using a scalpel, pick, or similar tool, peel away the slide pads on the bottom of the mouse in order to expose the three screws.
-
Using a PH0 / Phillips #0 driver, remove the 3 screws shown in red.
-
Gently separate the two halves of the case. Light prying may be required.
-
For PCB removal : remove 3 PH0 screws from PCB surface. The whole PCB can be taken out for inspection and repair after the screws are removed.
-
-
-
I experienced one switch working intermittently. In such case, I recommend replacing both L & R switches.
-
-
-
This is helpful for finding the correct replacement or compatible replacement e.g. vendors from online store AliExpress.
-
I used this as a successful replacement: RS Components Stock No. 682-1519 microswitch. Manufacturer is Omron, manufacturer part number is D2F-F.
-
To reassemble your device, follow these instructions in reverse order.
One comment
what is the name and type of switch number 3 / sw3