Logitech MX Anywhere 2 Right Click Switch Replacement

Written By: Max Murphy

Comments: 0

Logitech MX Anywhere 2 Right Click Switch Replacement

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

In this Guide I will show you how to replace a broken switch on a MX Anywhere 2. Also I am a beginner (meaning a 15 year old that likes to tinker with electronics), so don't expect Pro Advice.

Tools

Any generic Phillips head Screw Driver
solder pen

Parts

Switch Replacement

Step 1

First Remove the Mouse Skates. Then removes the 4 screws underneath.

Step 2

Take the Cover off.

Step 3

Then take all the screws out remove the battery, the scroll wheel, and the PCB board.

Step 4

Then use Solder pen to desolder the broken switch off the board.

Step 5

Then, take the broken switch off the board. Once that is finished, get the new switch and put it up against the solder holes. Melt the solder and Insert the switch in the 3 holes.