Logitech G910 Power Cord Replacement

Written By: Ahmed Al Hasan
  • Comments: 7
Logitech G910 Power Cord Replacement

Difficulty

Easy

Steps

4

Time Required

5 - 7 minutes

Introduction

This guide will teach you how to replace the power cord of your device. It's a relatively easy process, and you won't be needing any special skills.

  1. MiNgfyFtgRWBPYxi

    • Turn over the keyboard and remove the three screws using a Phillips #0 screwdriver.

    INACCURATE; So far I have identified this keyboard has Seven backplate screws - three pictured, two opposite, two hidden beneath the extending blue element. How is the backplate removed?

    Stone Dauhg -

    Yeah this doesn't seem right at all. They even show the PCB in the next pic. Clearly more screws. 7 across the top and 5 at least on the bottom. I still can't pullit open. Came here figuring I'd see what I'm missing.

    Jeffrey Scott -

    Just for anyone else annoyed by the incredible lack of info. I think there are 15 screws. First unscrew the smaller bottom part which is the underneath of the palm rest. The left, middle, and right rubber feet there are concealing a screw each. Once that part is off it'll reveal 5 or 6 (can't remember exactly) that are part of the main back piece were trying to remove. Theres also two screws hidden by the blue slide-y thing.

    Regardless.... a few more than 3....

    WildLicorice -

  2. LxsYEE1PZUGRFPtl

    • Remove the USB from the keyboard.

    holy crap you skipped a TON of steps

    Richard Baranski -

    This is fake.

    James Powers -

  3. pYaFkX1GufEZXYRx

    • Make sure the cord tab is not broken.

  4. qIjuTZ1cwbjUFvZG

    • If the cord tab is not broken, close it back.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ahmed Al Hasan

Member since: 18/01/18

127 Reputation

2 comments

Hello,

Where can I find a replacement USB cord ?

My board works fine but sometimes disconnects before the power cable is really used. I just want to change that cable

pittetflavia -

Yeah there is not problem replacing it but to find the cord itself. Cant seems to find replacement on the web.

LordGrizwold -